Besides giving your bathroom a more sophisticated look, a bathtub can work as a well-deserved break from the outside world. However, a dirty tub can be everything but relaxing! Spare the stress and learn how to make your tub clean once again with the following guide.
Step #1. Prepare the bathtub
To clean your bathtub in the best way possible, it needs to be completely empty. Taking out bath products may be obvious, but objects like mats or tub curtains can also get in the way during the cleaning. So, be sure to remove those, too.
Once done, soften dirt and stains by wetting the tub’s surface with warm water. If you’re also cleaning the outside, use a dampened microfiber cloth to moisten it.
Extra: Use a mat or some knee pads to avoid the pain from kneeling for most of the process.
Step #2. Make a homemade cleaning solution
Depending on the material your tub is made of, you’ll need a different cleaner to properly clean it. However, don’t worry about spending money on luxurious store-bought products—you may already have everything you need in your home.
- Ceramic, porcelain, acrylic. Due to being non-porous, these materials don’t require much cleaning power. Mix a squirt of mild detergent (look for the words gentle, mild, or sensitive skin on the label) with warm water until getting a sudsy result.
- Fiberglass. Fiberglass tubs are covered with a gel that, if scratched, could make dirt harder to remove. Make an effective cleaner by mixing ¼ cup of vinegar with a cup of water and loading it into a spray bottle.
- Stone resin. These tubs have a special shine that not every cleaner can achieve. Make one yourself with 1 ⅔ cups of baking soda, ½ cup of vegetable oil-based liquid soap, ½ cup of water, and 2 tablespoons of vinegar—mix it up well!
Step #3. Remove the stains
Some tubs are more delicate than others and may need a different approach when cleaning them. Follow these indications to prevent damage.
- Ceramic, porcelain, acrylic. Dampen a clean kitchen sponge with your DIY cleaner, and give the whole tub a good wipe-down, focusing on the grimier spots. If a stain is playing hard to get, give it a rubdown with the rough side of the kitchen sponge to take it out.
- Fiberglass. Spray your homemade cleaner all over the tub, paying special attention to stained areas. Then, let the cleaner work its magic for at least ten minutes. Finally, bust out a clean microfiber cloth to wipe away the dirt. For the stubborn spots, you’ll just need a bit more elbow grease.
- Stone resin. Apply your homebrewed solution with a clean cloth, working in small, circular motions to ensure an even spread. Rinse and repeat once.
Step #4. Clean the drain
No tub is truly clean without giving the drain some care. So, fill up a large container with hot water and pour it very carefully directly into the drain. Then, sprinkle a cup of baking soda down the drain hole and let it kick back for at least 20 minutes, bidding adieu to any funky smells.
After the wait, carefully pour hot vinegar into the drain to dissolve any leftover gunk. Finish the drill by slowly pouring hot water once more to give the drain a sparkling clean finish.
Step #5. Rinse and dry
To leave your tub ready, give it a final thorough rinse with warm water, ensuring there’s no residue left. Don’t forget to dry it! Lingering moisture can have unwanted effects on your tub.
Keep your bathroom and the rest of your home shining!
Cleaning your bathtub might not be as tedious as you thought, but it can still take you some time. Luckily, ProTouch Cleaners can help you! Our highly trained cleaners have everything to deliver a premium service. We’ll leave your bathroom and the rest of your house gleaming!
